Note
Follow the instructions on how to flash the device carefully from the tutorial below
I will not take responsibility on whatever may happen to your device.
To unbrick/flash or upgrade this device with any of the firmware, use odin
Download an install Samsung USB drivers
Put your device into download mode (volume down + home + power button)
Connect device to PC
Download the latest version of odin
Download and extract the firmware
Launch Odin
Click on AP button then navigate to the folder containing the firmware and select the file
After the file is analyzed, click start button and wait for process to complete
For a more detail guide including pictures and video, click here
For devices that keep having same problems after flashing with single file firmware, you will need to use repair firmware for them. This repair firmware has 4 files inside so you will have to load all of them in odin to do that follow the procedure below
Boot phone into download mode (Volume down + Home + Power key)
Connect device to PC
Launch odin
Click BL button then select file with name starting with BL in firmware folder
Click AP button and select file with name starting with AP in firmware folder
Click CP button and select file with name starting with CP in firmware folder
Click CSC button and select file with name starting with CSC in firmware folder
You can also click PIT and select PIT file (optional)
When all the files are selected, Click Start button and wait for flashing process to complete
For a more detail tutorial including video on how to use repair firmware, click here
DOWNLOAD
SAMSUNG GALAXY NOTE 10.1 GT-N8020 FIRMWARE
N8020XXUDNK1_XSADOA1 - Australia
No comments:
Post a Comment