Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
1.0 GHz dual-core Processor
1GB RAM
up to 32GB microSD
Dual SIM
2300mAh Battery
How to flash TECNO devices using WiseLink Tool
If you encounter any error while flashing your device, click here and see if it solves your problem
TECNO N8 QUICK SPECS
Dimension - 139 x 70.2 x 7.9 mm
5.0 - inch Touchscreen, 720 x 1080 pixels
Weight - 194g
1.0 GHz dual-core Processor
MediaTek MT6580
Mali 400-MP2 GPU
1GB RAM
8GB Internal Memory
up to 32GB microSD
5MP Rear Camera, LED Flash, Auto Focus
2MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
4G LTE
WIFI 802.11 b/g/n
bluetooth 4.0
2300mAh Battery
TECNO N8 STOCK ROM
N8-H356-C1-M-HiOS-TZ-TIGO-LOCK-20160602
Report if you cannot download any of these files.
Donate to support this site
How to flash TECNO devices using SP Flash Tool
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures on how to use SP Flash Tool, click here
How to flash TECNO devices using WiseLink Tool
Download and install the latest version of WiseLinkTool
Launch WiseLink Tool
Tick off-line log in then click Open RegCode File and select the zzzzzzzzzzzzz.key.
After selecting the file, Click OK to launch.
Click the Browse button (...) on Scatter Loading File
Navigate and select the scatter file inside stock ROM folder
Click Download button
Turn off device and connect to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch WiseLink Tool
Tick off-line log in then click Open RegCode File and select the zzzzzzzzzzzzz.key.
After selecting the file, Click OK to launch.
Click the Browse button (...) on Scatter Loading File
Navigate and select the scatter file inside stock ROM folder
Click Download button
Turn off device and connect to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
For a more detail guide with video and pictures, on how to use WiseLinkTool, click here
You can also use other tools like SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
If you encounter any error while flashing your device, click here and see if it solves your problem
No comments:
Post a Comment