Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk!
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong firmware, can render the device useless
(can't power on, can't charge and will not be detected by a computer)
How to flash SPD devices with Research Download or UpgradeDownload Tool
Download an install SPD drivers from here
Extract and Launch Research Download/UpgradeDownload Tool
Click on load icon
Navigate to the folder containing the firmware
Select the pac file in the firmware folder
Wait for it to load in Research Download/UpgradeDownload tool
Click Play/Start button
Now connect the device to PC while holding volume down key
(Some new devices requires holding volume up key)
Wait for flashing process to complete
When you see Passed! Then note that the flashing or upgrading process is complete
Disconnect and boot up device
You can also use tools like Miracle Box, infinity CMII, Volcano, GPG Dragon etc to flash or upgrade SPD devices
ITEL IT1409 QUICK SPECS
Dimension - 125 x 64.5 x 10.8 mm
4.0 - inch Touchscreen, 480 x 800 pixels
Weight - 194g
1.0 GHz dual-core Processor
SPREADTRUM
512MB RAM
8GB Internal Memory
up to 32GB microSD
2MP Rear Camera, LED Flash, Auto Focus
0.3MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800 / 1900MH
WCDMA 900/2100
WIFI 802.11 b/g/n
bluetooth 4.0
5600mAh Battery
ITEL IT1409 STOCK ROM
IT1409-W406-20160825
IT1409-W406-20160715
***************************************************************
IT1409-W406A-6.0-20170104
DOWNLOAD ROM
IT1409-W406A-6.0-20161227
DOWNLOAD ROM
IT1409-W406A-6.0-20161124
DOWNLOAD ROM
IT1409-W406A-6.0-20161023
IT1409-W406A-20160928
Read some tips to prevent bad display after flash here
Report if you cannot download any of these files.
Report if you cannot download any of these files.
Like and share
Learn how to easily download files from Mega
Donate to support this site
No comments:
Post a Comment