Thursday, August 11, 2016

Download Samsung Galaxy Note 3 Neo and Neo Duos Stock Firmware


Samsung Galaxy Note 3 Neo Quick Specs

Android 4.3 Jelly bean upgradable to 5.1.1 lollipop

148.4 x 77.4 x 8.6 mm in dimension
5.7 inches display
720 x 1280 pixel in resolution (267ppi)

Exynos 5260 Hexa
Hexa-core 2.3GHz
Mali T624 GPU

MEMORY
16GB internal
2GB RAM
up to 64GB microSD

8MP Back Camera & 2MP front Camera

GSM/HSPA/LTE Network
***********************************************************************************************

Download Samsung Galaxy Note 3 Neo & Neo Duos Stock Firmware



The firmware above can be flash using Odin

- Download and install samsung drivers

- Download and launch odin
- Turn off your phone
- Boot phone into download mode by holding vol down + home + power button
- When you see the yellow triangle, press volume up to continue into odin mode
- Now connect the phone to PC using USB cord
- Wait for odin to detect the phone (you will see the COM Port)
- Now click AP in odin interface then select the firmware
- After the firmware is successfully loaded,
- Click Start button
- Wait for process to complete
- When you see PASS in green then the process is complete.
- Wait for the device to reboot
Its always good to do a factory reset after doing this process

For a more detailed process on how to flash or upgrade Samsung devices, click here



No comments:

Post a Comment