If you want to repair your device, you can try to repair it by you. You have to charge your battery with any charger and charged it by 85%. Your data is very important for you so it is good to do a backup of your data it may consist like your contact details, your important messages, your emails or any other important thing which you feel to be the backup in your device. This backup can be done on another device. we have to do the backup because after a format of your device, all your data will be gone and it will not be recovered. For backup in other devices you can use other external device like your hard drive, SD card or any other suitable devices. If you are doing by your own. do it at your own risk as we don't take any responsibility if your device is damaged
This flash file is tested by me and it is working very well without any error, you can use this flash file when your device you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto apk installing, auto gone balance, pattern lock, screen lock etc these type issues you can use this way etc. This is used with out any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check your micro USB cable. if it is not good, you can not flash it. and the another one is to check your device battery. it should be not be low, it can stop your device between flash. before you flash it is necessary to save your data like contacts, photos, videos and other important things.
Micromax Q414 Canvas Blaze 4G+ you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related, if the error occurs of USB not recognized than your USB is not working.if battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box i will try my best to help you.
- Related Post : Micromax Q414 Canvas Blaze 4G+ Hard Reset
This flash file is tested by me and it is working very well without any error, you can use this flash file when your device you can use this guide when your device in hang on logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto apk installing, auto gone balance, pattern lock, screen lock etc these type issues you can use this way etc. This is used with out any tool and box.and also free for all who has knowledge about software in mobiles.for flashing file it is most important to first check your micro USB cable. if it is not good, you can not flash it. and the another one is to check your device battery. it should be not be low, it can stop your device between flash. before you flash it is necessary to save your data like contacts, photos, videos and other important things.
- Related Post : Micromax Q414 Canvas Blaze 4G+ USB Driver or Flash Tool
Micromax Q414 Canvas Blaze 4G+ you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related, if the error occurs of USB not recognized than your USB is not working.if battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box i will try my best to help you.
Required for Micromax Q414 Canvas Blaze 4G+
- Micromax Q414 Canvas Blaze 4G+ device with full charged battery, do not try with low battery
- Micromax Q414 Canvas Blaze 4G+ Stock ROM Firmware | V1_06.10.15
- Micromax Q414 Canvas Blaze 4G+ USB (Flashing) Driver | Download
- Miracle box
- Micro USB Cable with good quality
- Computer or Laptop
Procedure for Micromax Q414 Canvas Blaze 4G+
- Install Winzip software in your computer or laptop, if already installed then ignore
- Download tested Stock ROM firmware from above link, if link dead or not working just leave our comment on below comment box i will soon fix it
- Connect Miracle box to USB Cable and open miracle box from the your computer desktop
- Jump to MTK tab and choose Service tab
- Choose Boot to 8th Boot(MT65xx & MT67XX/8127)
- Click on Write option go down there to be Firmware button click there and choose MT6735M_Android_scatter.txt file from the MMX_Q414_SW_V2.0.1.... folder
- Now click on Start button and Insert USB Cable to device and wait until driver installing, if installed then downloading start automatically (Note : if driver not installed auto then manual update from the above link's driver)
- If device dead or not detect after inserted USB cable then use Volume Up key and Insert USB Cable (Note : you can use Volume Down also for detection)
- Wait until the finished process, do not unplug while device in flashing mode
- Congratulation you are done
Micromax Q414 Canvas Blaze 4G+ Flash done Screenshot:
Micromax Q414 Canvas Blaze 4G+ Flash done Video:
No comments:
Post a Comment