Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
How to flash MTK devices using SP Flash Tool
Download, MTK VCOM USB drivers from here
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
ITEL IT1410 QUICK SPECS
Dimension - 138.5 x 69.5 x 8.9 mm
4.0 - inch Touchscreen, 800 x 480 pixels
1.2 GHz quad-core Processor
MT6572
Mali 400 GPU
MT6572
Mali 400 GPU
512MB RAM
8GB Internal Memory
up to 32GB microSD
2MP Rear Camera, LED Flash, Auto Focus
0.3MP Front Camera
Dual SIM
EDGE , GPRS - 850 / 900 / 1800
WIFI 802.11 b/g/n
bluetooth 4.0
2800mAh Battery
ITEL IT1410 STOCK ROM
IT1410-H721-D1-KK-IN-20160501
Report if you cannot download any of these files.
Like and share
No comments:
Post a Comment