Note
Follow the instructions on how to flash the device carefully below
I will not take responsibility on whatever may happen to your device.
Flash at your own risk..
Make sure you are downloading the exact ROM of the device you want to flash because
flashing a wrong preloader, will make the device completely dead
(can't power on, can't charge and will not be detected by a computer)
Again these are clone devices. Its always advisable to READ the complete ROM using tools like Miracle Box, infinit CM II, Volcano Box etc before flashing with any of the ROMs downloaded so that if any thing goes wrong, you can always revert back.
How to flash MTK devices using SP Flash Tool
Download, latest SP Flash Tool from here
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
Launch Flashtool inside the extracted folder
Click on scatter loader button
Select the scatter file inside the stock ROM folder of the device you want to flash
Select either Download only, Firmware Upgrade or Format + Download from drop down menu
Click Download Button
Now turn off and connect your device to PC
Wait for flashing process to complete
Reboot device
If there was no cache or userdata inside the ROM folder, you might need to factory reset device from recovery after flash
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device
SAMSUNG GALAXY J100 CLONE STOCK ROM
SM-J100H-MT6572-DS
SIZE: 683MB
SIZE: 683MB
SM-J100H-MT6572-j13g_4.4.2_ALPS.KK1.MP7.V1
SIZE: 366MB
SIZE: 366MB
No comments:
Post a Comment